Autel VCI Mini is designed to connect wirelessly with the MaxiCom / Maxicheck / MaxiPro and MaxiTPMS Display Tablet, as a vehicle communication interface (VCI) for vehicle data transmission. Thanks to the wireless Bluetooth technology, with which you are allowed to work freely around the vehicle. This interface device can communicate with vehicles' electronic control units (ECUs), guaranteeing performance and speed that redefine multi-brand diagnostics. Wireless Bluetooth VCI Adapter Connection for MK808BT Connector AUTEL MAXISYS.Connects to The Vehicles OBDII Port. Lightweight Vehicle Connection Interface (VCI).
Enables The Autel Tablet to Connect to The Vehicles. Allows Technician to Perform Testing Outside Vehicles. The Tablet in This Advertising is Not Included! It is for Reference Only!
The MaxiVCI Need to Be Used With. Autel Tablet Device Like MK808BT, MK808TS, MX808TX, MP808TS. The MaxiVCI Mini operates on 12-volt vehicle power, which is received through the vehicle's DLC.
The unit powers on whenever it is connected to the vehicle's DLC. Autel MaxiVCI - Vehicle Communication Interface. The wireless diagnostic interface MaxiVCI Mini is a small vehicle communication interface (VCI) used to connect to a vehicle's data link connector (DLC) and connect wirelessly with the tablet for vehicle data transmission. Vehicle Data Connector (16-Pin) - connects the MaxiVCI Mini to the vehicle's 16-pin DLC directly.
Power LED - refer to Table 2- 2 Power LED on the Front Panel. Connection LED - refer to Table 2- 3 Connection LED on the Front Panel. USB Port - provides the easiest connection between the device and the tablet via a USB cable. Table 2- 2 Power LED on the Front Panel. Lights solid green when powered on.
Blinks red when system failure occurs. Note: The power LED briefly lights red each time the device powers on and then lights green when the device is ready.Table 2- 3 Connection LED on the Front Panel. Lights solid green when the device is successfully connected via the USB cable but is not communicating with the vehicle. Blinks green when the device is successfully connected via the USB cable and is communicating with the vehicle. Lights solid blue when the device is successfully connected via BT but is not communicating with the vehicle. Blinks blue when the device is successfully connected via BT and is communicating with the vehicle.
2.1 + EDR USB 2.0. 12 VDC to 24 VDC. Please kindly be patiently wait for your order.
This will help your product to be received safely and quickly! And we are not responsible for order's delay or miss because of your incomplete contact information.
Please return the item within 30 days after receiving if you are not happy with your purchasing. We have been engaged for many years in the line of automobile diagnosing instruments and our corporation is established for the purpose of trustworthiness. We have office in Shenzhen, China and 2 warehouses that are located in HongKong and US. This item is in the category "eBay Motors\Automotive Tools & Supplies\Diagnostic Service Tools\Code Readers & Scanners".The seller is "auto--master" and is located in this country: US. This item can be shipped worldwide.