Autel MP808TS Bidirectional Diagnostic Tool Full System Scanner TPMS Programming. Autel MaxiPRO MP808TS TPMS Diagnostic Scanner, 2022 Newest Scan Tool with Complete TPMS Function, 30+ Services, Bi-Directional Control, OE All Systems Diagnostics Same as MS906TS MS906Pro-TS. Supports 80+ US, Asian, and European vehicle makes and models.
Complete capabilities for codes, live data, active test, information, adaptation, matching, etc. OE-level diagnoses for all electronic systems; 30 Special functions for various car maintenance. VAG Guided Function for VW, Audi, Seat, Skoda, etc. TPMS Installation to prevent tire pressure-related problems.
Complete OBD2 functions and TPMS functions; Auto VIN for vehicle's make, model, and year information. 18 mainstream languages, including English, Spanish, German, French, Russian, Japanese, Korean, Arabic, etc. Android-based operating system with a quad-core processor. 7 LCD touchscreen with 1024x600 resolution.
5000 mAh lithium-polymer battery for around 7-hour continuous use. 64GB memory; Bluetooth Connection, WiFi.
Growing Powerful OE-Level Functions of Autel MP808TS Car Diagnostic Tool. Designed with complete TPMS functions, MP808TS diagnoses TPMS system's health status by reading the TPMS trouble code, activate all known TPMS sensors on the market, view TPMS sensor data directly, program the Autel MX-sensors to replace the bad ones, and relearn the TPMS sensor to the vehicle's EC/U, MP808TS provides you with superior special functions for TPMS services with ease.
Full Systems Diagnoses In All Vehicle Systems on the EC/Us. Read / erase codes, view live data, retrieve EC/U version information, do active test and service functions for all systems including EC/M, TC/M, ABS, SRS, BCM, IMMO, BMS, TPMS, SAS, Fuel System, Light System and A/C system etc. With the coverage of up to 20000 of car models across the global. EC/U Coding function is used to re-flash the vehicle control modules, it allows you to reprogram adaptive data for certain components after making repairs or replacements, providing ways for the issues of Drivability, Fuel Efficiency, Power Loss, Fault Codes, Durability of Mechanical Parts. Requests a module to perform a specific test and function.
(Turn on and off actuators to determine whether there are problems with sensors and actuators). This function can be use in ENGINE SYSTEM / STEERING ANGLE SYSTEM / DASHBOARD SYSTEM / EMISSION SYSTEM... (depends on the specific car models, not for all cars).This function matches and synchronizes the components with each module after you replace the module, such as: Gearbox Matching / Air Suspension Matching / Seat Matching / Head light Fitting / Door and Window Initialization Study / Sunroof Initialization / Injector Calibration / Multimedia Video Reset / Cluster Reset / Immobilizer Service / Tire Change Reset... Etc (depends on specific car models, not for all cars). When you replace the audio, radar, window and other modules, you need to refresh the car frequently to achieve the recognition module effect, you need to use this function. The module functions supported by different models are different. Not only users can launch the remote diagnosis with other diagnostic scanners of LAUNCH family, which are equipped with this module as well, also they can ask for the remote control through phones, tablets, and computers etc. It has realized the reality that a mechanic can diagnose an abnormal vehicle which is even thousands of miles away. TOP Auetl MP808TS Diagnostic Scanner with Complete TPMS Functions. MP808TS scanner is a TPMS diagnostic tool integrated with 30+ maintenance functions and full TPMS functions, which makes it become an extra favorable tool in solving TPMS problems. Autel MP808TS supports TPMS Diagnostics, Sensor Activating, MX-Sensor Programming, TPMS Relearning, TPMS Retrofitting, etc. Read and erase TPMS DTCs, receive live TPMS data, locate TPMS problems and turn off the TPMS light. Sensor Activating: MP808TS allows mechanics to activate the TPMS sensor to view sensor data like sensor ID, tire pressure, tire temperature, battery condition, and sensor position. MP808TS TPMS tool can program the original sensor ID data to the MX-Sensors to replace existing sensors with low battery life and ones that are no longer functioning. This MP808TS programming tool offers 4 methods for programming MX-Sensor: Copy by Activation, Copy by OBD, Copy by Input, and Auto Create 1-16 Sensors. This function is used to write sensor IDs into the vehicle EC/U for sensor recognition. MP808TS relearn tool provides 3 ways to match/relearn sensors: OBD Relearn, Automatic Relearn, Stationary Relearn. Retrofit the TPMS modules for some vehicles and display the related TPMS data(tire pressure, temperature, sensor) on the dashboard to facilitate timely diagnosis and resolution for TPMS problems to ensure the safety of drivers. EC/U Coding, Easy But Never Fail. EC/U coding is one of the criteria by which a professional mechanic is judged, but it also adds value to your business. The EC/U coding allows vehicles to stop being bound by OE settings. Tuning the ignition time, tuning the oil injection, adjusting the air intake, tuning the auto gearbox shift point, etc. These functions the others can only dream of! It's like opening a pandora box that you don't want to be closed! If you happen to be in the car tuning industry, the EC/U coding can be a great plus and give you an edge over peers! Part 2 Flash Hidden Function. The Flash Hidden function allows you to customize some of the features on the vehicles such as one-touch signal flickers, deactivate some buzzing sounds, needle sweep (Only for VW), auto-hold, etc.
And also, the Autel MaxiPRO MP808TS provides you with the guided function especially for VW and Audi. The guided function will guide you step-by-step through the complexities of the situation. So you would have a clear picture of what to do! Note: The Flash Hidden Function and Guided Function can only be performance on certain vehicle models, please let us know for further detail before purchasing.
Active Test, Know the Real Issue. Before removing each control unit and component, the bi-directional control would be a better option to locate the problems. The MaxiPRO MP808TS would be a commander instead of being an order receiver of EC/U. Q: Why does my car window cannot be rolled up? A: There must be something wrong with window control units or window lift motor.Q: Then, how can I tell? A: Run a bi-directional test first. If the Autel scanner can pass through the EC/U to roll the window up and down, then the problem is the window control units. Q: I couldn't shut off the sunroof yesterday, can you give it a look. A: Sure, after running an active test I can figure out whether the problem is sunroof control module or the motor. Q: How that can be? A: If the scanner can shut off the sunroof through communicating with EC/U, then problem would be the control module. The bi-directional control saves you and time and trouble! All systems diagnostic function comes with great convenience for you because it will give your vehicle a thorough inspection as an OE-level device does. MP808TS scan tool goes deep into all available EC/Us, reads & clears codes, views data stream and vehicle information to find out the problems hidden below the hood. MP808TS scanner for car covers Engine, Transmission, ABS, Air Suspension, Air Conditioning, Body, SAS, Seats, TPMS, IC, BCM, and so on. 30+ Maintenance Service, Save Time and Budget.
Given the continuous innovation in the automotive aftermarket, the automotive scan tool MaxiPRO MP808TS has increased its special functions from 25 to 30+. And it is constantly being updated to meet new market needs. Oil Reset: reset the oil life system and turn off the oil light after oil or oil filter replacements.
EPB: reset the brake pad after replacing the brake pad, the servo motor, etc. Deactivate/activate the brake control system, assist with brake fluid control, open and close brake pads, etc.
TPMS: reset the tire pressure and turn off the tire pressure fault indicator. BMS: reset the monitoring unit of the car battery after replacing battery or battery monitoring sensors. Brake/ABS Bleed: bleed the brake system when the ABS system contains air to restore its braking sensitivity. DPF: Regeneration: clear particulate matter from the DPF filter through continuous combustion oxidation mode to stabilize the filter performance. IMMO Keys: disable the lost vehicle keys and program the replacement key fob.
Injector Coding: write the actual code of the fuel injection nozzle or rewrite the code in the EC/U to the code corresponding to the fuel nozzle of each cylinder after replacing the EC/U and the fuel injector, to accurately control or correct the fuel injection amount of each cylinder. SAS Calibration: calibrate the steering angle after replacing steering related parts. Suspension Level Calibration: adjust the vehicle height sensor for level calibration when replacing the vehicle height sensor or control module in the air suspension system. Sunroof Initialization: initialize the sunroof data to set the sunroof lock off, close in rain, memory function of sliding/tilting sunroof, outside temperature threshold, etc.Seats Calibration: specially designed for the seats with memory functions. Match the seat after repairing or replacing the seat. AndroidT 4.4.2, KitKat. Cortex-A9 quad-core processor (1.4 GHz). 7-inch LCD capacitive touchscreen with 1024x600 resolution. Mini USB 2.0 USB 2.0. Micro SD card slot (supports up to 32GB). Light sensor for brightness auto adjust. 3.7 V/5000 mAh lithium-polymer battery. Charges via 5 VDC power supply. Around 7 hours of continuous use. 0 to 55°C(32 to 131°F). 20 to 60°C (-4 to 140°F). 270.8 mm (10.0") x 176.0 mm (6.9") x 36.0 mm (1.4). 885 g 2.31 lb. ISO9141-2, ISO14230-2, ISO15765, K/L-Line, Flashing Code. ISo11898(Highspeed, Middlespeed, Lowspeed and Singlewire CAN, fault-tolerant CAN). SAE J2610, GM UART UART Echo Byte Protocol.
Honda Diag-H Protocol, TP2.0, TP1.6. Otherwise an Unpaid Item case will be opened to you.
We have warehouse in USA, DE, UK, Australia and China warehouse. From our Hong Kong warehouse via DHL or UPS. We will try our best to give customers good and pleasant parchasing experience. 12 months free repair for the devices.
3 months for the accessories. If after 30 days, or the item has been used, we have the right to decline your claim.
We are specialized dealer of On-Board Diagnostic tools and automotive electronics for more than 5 years. We are authorized first class distributor of Launch and Autel brands.Our customer-oriented service strives for positive feedbacks. Business time: GMT8 (9:00-18:00) from Monday to Friday. This item is in the category "eBay Motors\Automotive Tools & Supplies\Diagnostic Service Tools\Code Readers & Scanners". The seller is "diag-master" and is located in this country: US. This item can be shipped to United States.