Adapter Battery Wireless

Autel Maxisys MS906TS MS906S MK906BT Auto Diagnostic Scanner cod-ing Tool 2022

Autel Maxisys MS906TS MS906S MK906BT Auto Diagnostic Scanner cod-ing Tool 2022

Autel Maxisys MS906TS MS906S MK906BT Auto Diagnostic Scanner cod-ing Tool 2022

Autel Maxisys MS906TS MS906S MK906BT Auto Diagnostic Scanner cod-ing Tool 2022. Top Reason to choose Autel Maxi. Upgraded from MS906/MS906BT, MK906BT scanner has OE-level diagnostic capability as MS908 and performs 10+ advanced functions like E/C/U C-oding&Adaptation, bidirectional control, 36+ services, guided function, customization, etc. Compared to MS906BT, it has no IP restrictions, supports 13 languages, and comes with a complete OBD I connector kit (valued at 150 USD). Best choice for technicians, advanced DIYers, workshops, garages, and mechanics.

Do you want to do some high-end repairs or customize your car? Then you can't miss Autel MK906BT scanner! It can perform advanced E/C/U C-oding to change pre-programmed options already existent in the vehicle's software, commonly used to help activate/match/code/relearn the replaced E/C/U modules to the on-board systems, change some annoying factory-settings, or unlock high-end features hidden in your car. Compatible with BMW, Porsche, VW, etc. Are you still spending a lot of time looking for car problems? Guess and guess, why don't you test it now?

Bidirectional scan tool MK906BT can perform active test that can send commands to the E/C/U to activate the actuators, like ABS, window, door, solenoids, valves, wipers, headlamp, etc, for directly monitoring their operation to quickly find out bad parts and pinpoint faulty issues. The options available vary by vehicles. How much did you spend on maintaining your car?

So Autel MK906 Pro are actively reducing the unnecessary expense by integrating 36+ services, meeting 99% of maintenance needs, such as Oil reset, EPB, SAS, DPF, BMS, ABS Auto Bleed, Injector, IMMO etc. Wireless diagnostic tool MK906BT, with the same diagnostic capability as MS908/MK908, can access all available vehicle modules including but not limited to PCM, ECM, TCM, BCM, SCCM, etc, and perform active tests, guided function, C-oding, adaptation, etc. Guided functions provides OE-level guidance and allows you just follow the screen instructions step by step to complete some complex operation, compatible with VW, Audi, Skoda, Seat, Bently, etc.

Support AutoAuth gateway access, you can use MK906BT tablet to bypass SGW module and access to 2018 & newer FCA(Fiat Chrysler) vehicles, such as Chrysler, Dodge, Jeep, etc, still increasing. You can use current software normally even 1 year free update period expires. 2022 Newest Version: Autel MaxiCOM MK906BT Car Diagnostic Scan Tool.

Autel MaxiCOM MK906BT is an advanced automotive diagnostic scanner, with its reasonable price but excellent capability, making it popular with home mechanics, auto DIYers, and repair shops. Unlike the old version Autel MS906, 2022 newest wireless version MK906BT takes a great leap in hardware and software, coming with doubled battery capacity(10000mAh) and German wireless technology, integrating advanced E/C/U C-oding (same as MS908S), Bi-directional control, 31+ services, VAG Guided functions, refresh hidden features, All system diagnosis, covering 10,000 + car models in the market. Autel MaxiCOM MK906BT Key Features. The essence of E/C/U C-oding is to change pre-programmed options already existent in the vehicle's software. If you want to do high-end repairs or customize you car, MK906BT scanner can do it!

It has same C-oding capability as Autel MS908 but cost less. Compatible with BMW, Porsche, VW, Nissan, Nissan-GTR, Infiniti, Hyundai, etc. Commonly used in the following aspects. When you need to replace a new E/C/U module or a bad component, E/C/U C-oding can help you activate/match/code/relearn "these new guys" to the car computer and get them recognized by other in-vehicle modules, then they can work.

Access to Autel server to get OEM update data to upgrade or replace the existing software or firmware in the E/C/Us to latest version, fixing software-controlled drivability issues. E/C/U C-oding can help you to change factory settings and refresh hidden features. So you can disable some unneeded factory settings, such as disable auto start-stop. Annoying chimes like door open/close chime, seat belt chime, low fuel chime, etc.

Also you can activate the hidden features already programmed to car computer to get high-end functions, such as auto start-stop system, US-style daytime light, auto door look at particular speed, etc. Compatible with VW, Audi, Skoda, etc. E/C/U C-oding is not universal on all vehicles and varies by you car make, model, year. Before performing E/C/U C-oding, please make data backup to MK906BT in advance.

When the operation interrupts or fails, you can restore to the state before C-oding with one key, and then do C-oding again, which is convenient and safe. Don't confuse C-oding with Pro-gramming. MK906BT does not support E/C/U Pro-gramming. Dealership-Level All System Diagnostic &. Advanced diagnostic scan tool MK906BT, with the same diagnostic capability as MS908/MK908P, can scan all available car systems including but not limited to PCM, ECM, TCM, PDM, BCM, TPM, SCCM, RADIO, etc, covering 80+ American, Asian and European vehicle makes.

Autel MK908BT comes with Bluetooth VCI (V100) for OBDII-port communication, up to 75ft(23m) working range, enabling wireless diagnostic with more stable and faster data transmission. With MK906BT scanner, you can read codes, clear codes, view live data and E/C/U info, perform active tests. Retrieve detailed information of DTC records to locate problems. Erase DTC records and other data after reading codes and making appropriate repairs.

View live data and parameters of multiple sensors in text, graph & analog. View the specific information for the tested control unit, including unit type, version numbers and other specifications. Perform real active tests that can send commands to the vehicle's E/C/U to drive the actuators to work, like ABS motor, window, door, solenoids, valves, wipers, headlamp, etc, helping quickly find the issues and in many events test the sensors or parts to verify the issues. Do cylinder drop test (power balance test) to determine which cylinder is on fire. Turn on /off the fuel pump to determine if there is a broken fuel pump.

Turn on /off windshield wipers, windows, door. Cycle the a/c clutch on and off.

There is no scanner tool to perform active tests on all cars. 36+ Most Commonly Used Resets & Services.

Upgraded from MS906/MS906BT, Autel MK906BT scanner integrates 36+ hot and special functions covering 99% of common maintenance needs, providing quick access to the vehicle systems for various scheduled reset and repair tasks. 20+ Commonly Used Reset Functions for Fast Maintenance or Repairs. Oil Reset, EPB, BMS, ABS Bleed, TPMS, Airbag Reset, DPF Regeneration, IMMO Service, Injector C-oding, SAS Calibration, Suspension Calibration, Throttle Adaption, ABS/SRS, Gear Learning, Sunroof Initialization, Seats Calibration, Language Change, Headlight Matching, A/F Setting, WIN DR Roof, Odometer, CHG Tire Size, Cylinder, Turbocharging, Limit, Trans Adaption. 10 Advanced Functions for Different Vehicle Models. Neutral Gear Position Learning, Torque Sensor Adjustment, Signal Check, Yaw Rate Sensor (YRS) Learn, Clutch Pedal Position Learn, Cylinder Power Balance, Component Matching, Stop/Start Reset, Transport Mode, Auto-Door Lock, etc.

Reset service mileage & service intervals after engine oil is changed. To replace the worn brake pads/discs, you need to use MK906BT to enter Service mode, and then exit the mode after the replacement. Register the battery after replacement. Perform DPF Regeneration to clear the blockage through continuous burning of the particulate matter captured in the DPF filter and turn off DPF warning light. When you disassemble the steering column or the steering angle sensor has a problem/replacement, it is necessary to do a reset/calibration to ensure the accurate steering of your vehicle. Write the new code to the E/C/U after replacement of injector. Advanced Features for VAG Cars. Like a master, each function provides OE-level guidance and allows you just to follow the screen instructions step by step to complete the corresponding operation. Best tool for beginners and DIY mechanics. Compatible with VW, Audi, Skoda, Seat, Bently, etc. With Autel MK906BT scanner, you can customize your car by unlocking hidden features that are programmed in the car computer but not shown on the display settings, such as Auto Park function, tilting rear-view mirrors, one-button lift window, start and stop memory, display digital speed, adjust turn signal flashing times, automatic window closing, etc.

This service is designed for Asian vehicles that have low-grade anti-theft systems. If compatible with your vehicles, you can not only disable the lost vehicle keys but also program a replacement key fob. Not support the All Key Lost function! If you need professional IMMO tools that can perform Key.

And advanced IMMO functions, please consider Autel IM508 /IM608/IM608 PRO. You can use MK906BT tablet to bypass SGW module and access to 2018 & newer FCA(Fiat Chrysler) vehicles, such as Chrysler, Dodge, Jeep, etc, still increasing. Generate and print out the "Pre-SCAN Report" before repairs, formulate an effective repair plan, exE/C/Ute "Auto SCAN Repaired Vehicle" after repairs, ensure that no new faults are generated during repairs, and certify all DTCs on the pre-scan report have been repaired. If you are confused about diagnostic results, you can upload your diagnostic report to the Autel server on Data Logging, so that Autel engineers can directly receive and deal with your problem, and feedback the problem solution.

F you have any operational problems, you can use Remote Desk to allow Autel's support center, colleagues, or friends, to control your MK906BT tablet on their PC and perform remote diagnostic, with step-by-step operation to show you, easy to solve problems. Things you might be concerned about. Automotive diagnostic scanner MK906BT works on over 80+ US domestic, European and Asian makes and models, up to 2019, 2020, some 2021, which is ahead of the most diagnostic scanners at the same price. Considering the Non-OBD II vehicles, MK906BT is equipped with an extra complete OBDI connector kit.

N: Acura, Daihatsu, Hyundai, Infinit, Kiat, Mazda, Nissan, Scion, Subaru, Toyota, Manhindra, Proton, Daewoo, Honda, HyundaiCV, Isuzu, Lexus, Mitsubishi, Samsung, Ssang Yong, Suzuki, Fuso, Perodua, Tata.. VW, Abarth, AstonMartin, MINI, Sprinter, SKODA, Citroen, Fiat, Lancia, Maserati, Opel, Porsche, SAAB, Vauxhall, Seat, Bugatti, Audi, Ford EU, BMW, Alfa, Benz, Maybach, Ferrari, Jaguar, Land Rover, Peugeot, Renault, Smart, Volvo, Lamborghini, Bentley, Rolls-Royce, VW CV, Dacia, LT3... Chrysler, Dodge, Ford, GM, JEEP.. After registration, you can enjoy one-year free software and firmware updates. We guarantee that the IM608Pro we sell are always the latest version of Autel's official update.

But Autel IM608 Pro scanner never stops upgrading. Support 13 languages, such as English (by default), German, Spanish, French, Traditional Chinese, Japanese, Polish, Portuguese, Russian, Italian, Korean, Dutch, Swedish, etc. Full Packs of Connectors & Cables. >> Honda-3 Adapter, Nissan-14 Adapter, Mitsubishi/Hyundai-12+16 adapter, Kia-20 adapter, Benz-38 adapter, Benz-20 adapter, VW/Audi-2+2 adapter, GM/Daewoo-12 adapter, Chrysler-16 adapter.

Recommended Use:Indoor Operating System:AndroidT 4.4.2, KitKat Processor: Samsung Exynos T5260 6-Core Processorr (1.3 GHz+1.7GHz) Memory:2GB RAM & 64GB On-board Memory Display:8-inch LCD capacitive touchscreen with 1024x768P resolution Connectivity: Mini USB 2.0/USB 2.0 / Wi-Fi /BT v. 2.1 + EDR/ HDMI 1.4a / Micro SD card. Camera(rear): rear-facing, 8.0 Megapixel, AF with Flashlight Sensors:Gravity Accelerometer, Ambient Light Sensor (ALS) Audio input/output:Microphone/Single Speaker/3-Band 3.5 mm stereo&standard headset jack Power and Battery:3.7 V/10000 mAh lithium-polymer battery Charging via 12V AC/DC power supply.

Input Voltage: 12V (9-35V) Power Consumption:5W Operating Temp:0 to 50°C(32 to 122°F) Storage Temp:-20 to 60°C (-4 to 140°F). Housing: Strong plastic housing with protective rubber boot Dimensions (W x H x D): 270.8 mm (10.6") x 176.0 mm (6.9") x 36.0 mm (1.4) Net Weight:: 1.05 kg 2.31 lb. Protocols: ISO 9142-2, ISO 14230-2, ISO 15765-4, K-Line, L-Line, Flashing Code, SAE-J1850 VPW, SAE-J1850 PWM, CAN ISO 11898, High speed, Middle speed, Low speed and Single wire CAN, GM UART, UART Echo Byte Protocol, Honda Diag-H Protocol, TP 2.0, TP 1.6, SAE J1939, SAE J1708, Fault-Tolerant CAN. Otherwise an Unpaid Item case will be opened to you. Please return the item within 30 days after receiving if you are not happy with your purchasing.

We are specialized dealer of On-Board Diagnostic tools and automotive electronics. For more than 10 years.

Business time: GMT8 (9:00-18:00) from Monday to Friday. This item is in the category "eBay Motors\Automotive Tools & Supplies\Diagnostic Service Tools\Code Readers & Scanners". The seller is "de_canbus" and is located in this country: US. This item can be shipped to United States.

  • Model: MS906TS
  • Part Brand: Better than DS808 MaxiSys MS908 MS906 MS906BT
  • Accessories: Adapter Cable, Carrying Case, USB Cable, User Guide
  • Brand: Autel
  • Warranty: 1 Year
  • Supported System: ABS, DPF, EPB, SAS, SRS, TPMS, Oil Reset, Engine, Transmission, All Systems Diagnoses
  • OBD Interface: CAN, EOBD, OBD, OBDII
  • Type: Auto Professional Diagnostic & Service Tool
  • Memory: 2 GB RAM & 64 GB ROM
  • Connectivity: Bluetooth
  • Display: 8.0\
  • Camera (rear): Rear-facing, 8.0 Megapixel, AF with Flashlight
  • Sensors: Gravity Accelerometer, Ambient Light Sensor (ALS)
  • Audio Input/Output: Microphone, Single Speaker, Standard Headset Jack
  • Power and Battery: 10,000 mAh 3.7 V lithium-polymer battery
  • Dimensions (W x H x D): 270.8 mm (10.0”) x176.0 mm (6.9”) x36.0 mm (1.4”)
  • Features: Backlit Display, Built-In Battery, Check Engine Light Shut Off, Color Display, Erases Codes, Freeze Frame Displays, Internet Updateable, LCD Display, Multi-Language Interface, User Friendly
  • Manufacturer Part Number: MaxiSys Elite ultra MK908P MS908S PRO icarsoft GM
  • Vehicle Type: Passenger Vehicle
  • Free Update: 1 Year
  • Advantage: Co-ding, Active Test, Optimal Use
  • Advantage 2: Full TPMS Service Functions, Wireless Bluetooth
  • Model 1: Autel MaxiCom MK906BT
  • Model 2: Autel MaxiSys MS906TS
  • Model 3: Autel MaxiSys MS906S


Autel Maxisys MS906TS MS906S MK906BT Auto Diagnostic Scanner cod-ing Tool 2022