OE-level diagnoses for all electronic systems; 30 Special functions for various car maintenance. VAG Guided Function for VW, Audi, Seat, Skoda, etc. TPMS Installation to prevent tire pressure-related problems. Complete OBD2 functions and TPMS functions; Auto VIN for vehicle's make, model, and year information.Android-based operating system with a quad-core processor. 7 LCD touchscreen with 1024x600 resolution. 5000 mAh lithium-polymer battery for around 7-hour continuous use.
64GB memory; Bluetooth Connection, WiFi. Car Coding changes preprogrammed options already existent in the software, like disabling, personalizing, adjusting, and upgrading some features to fit your needs. MP808TS can help you disable the automatic engine Start-Stop system, customize the daytime running lights, set the speed to show in the digital display below the speedometer, transform your parking system into the F model, etc.
Note: Not universally compatible with all cars. OE-Level Diagnoses for All Systems. Like an OEM scanner, Autel MP808TS can access the electronic control unit for various vehicle control systems. It's capable of performing OE-level diagnoses on all car systems and allowing you to retrieve information, read & erase trouble codes, and view live data on all available electronic systems, such as Engine, Transmission, Antilock Brake System (ABS), Airbag System (SRS), SAS, Air Conditioning, Audio, Headlight, etc.
Active test, also known as Bi-directional Control or Actuator Test, allows you to control a specific vehicle system, subsystem, or component. Through performing active tests, this bi-directional scanner can turn the fuel pump on and off, cycle the a/c clutch on and off, and even helping with an emissions leak test, etc. Universal tpms programming tool Autel MaxiPRO MP808TS possesses all functions of a professional TPMS diagnostic tool. It can perform the fundamental TPMS diagnoses to read and clear codes, display system data, turn off the faulty light. Moreover, it is equipped with TPMS advanced functions such as TPMS programming, activation, and relearning.
Most vehicles require a TPMS tool to activate each of the tire pressure sensors in a specified sequence so the TPMS control module can relearn their new locations after sensors on this module or the tires are changed. With this scanner MP808TS, repair shop technicians can finish the process within a few steps instead of advising your customers to drive the vehicle to the original car dealer for reprogramming with a bulk of bucks. To clear the air, below is how it performs TPMS functions in steps. Back up the vital information. Since the vehicle information and TPMS relearn procedure varies greatly, before you process the procedure, please back up all the required information.
If you use Autel Sensors as the replacement, the programming process is needed. Before you install the sensors, programming them with guidance. Place scanner near the tire pressure sensors you placed to wake up the sensors. As soon as the scanner sends the signal to the TPMS module, it recognizes the sensor and learns its positions, the relearn procedure is complete. If the pressure of the tires is too low, it would cause tires to wear, make the tire poorly handle within corners, or turn around, especially when the road is wet, or even cause a puncture.
TPMS warns the driver early in the event of a drop in tire pressure so that the driver can act quickly. However, some vehicles might not have a TPMS module. This scan tool can guide technicians to finish the retrofitting procedure, which is quite useful.
30 Special Functions Offer Easy and Fast Maintenance. Autel MP808TS comes with 30 special functions, including 25 commonly used special functions and 5 advanced special functions. All make it possible for beginners or mechanics to do easy and fast car maintenance. 5 Most Frequently-Used Special Functions. Oil Reset: performs reset after replacing engine oil.Throttle Reset: adjusts the amount of air intake. EPB Reset: resets the brake pad after the brake pad replacement. BMS Reset: clears fault info of the original battery and resets the new battery.
Suspension Calibration: adjusts the height of the car body. The Rest of 25 Special Functions. SAS Reset, DPF Regeneration, ABS Bleeding, IMMO Service, Sunroof Initialization, Gearbox Matching, AFS Headlamp Reset, Injector Coding, Gear Learning, TPMS Reset, etc. Otherwise an Unpaid Item case will be opened to you. We have warehouse in USA, DE, UK, Australia and China warehouse.
From our Hong Kong warehouse via DHL or UPS. We will try our best to give customers good and pleasant parchasing experience. 12 months free repair for the devices. 3 months for the accessories.
If after 30 days, or the item has been used, we have the right to decline your claim. We are specialized dealer of On-Board Diagnostic tools and automotive electronics. For more than 10 years. We are authorized first class distributor of Launch, Autel, Ausdom, Caska and Ehang brands. And more brands will be show in our store in near future.
Business time: GMT8 (9:00-18:00) from Monday to Friday. This item is in the category "eBay Motors\Automotive Tools & Supplies\Diagnostic Service Tools\Code Readers & Scanners".The seller is "innovazhy" and is located in this country: HK. This item can be shipped worldwide.