As an ENTRY-LEVEL Autel scanner tablet, MK808BT can perform basic service/hot functions like Oil Reset, EPB Reset, SAS Reset, DPF, BMS, ABS Bleed, Injector, Throttle, etc. Autel MK808BT automotive diagnostic tablet can access and scan all available systems on 80+ US, European, Asian makes and models to read and clear codes, view live data and ECU information. ABS Auto Bleeding & AUTO VIN SCAN? Of MK808/MX808 & Support Spanish Menu?
BT connects wireless diagnostic interface allowing remote diagnosis of the vehicle. 2022 Autel MaxiCOM MK808BT Pro Car Diagnostic Tool Auto OBD2 Scanner Code Reader. Upgraded from MK808/ MX808, Autel MK808BT is the most powerful wireless diagnostic tool for it's price! Auto Scan & Auto VIN? Compatible with Autel BT506 battery tester/ MV108?
Designed for workshops & DIYers. Autel MaxiCOM MK808BT has been. Required, which MK808 wired tool doesn't support.
"Auto Auth" gateway for 2018 and newer FCA cars(Chrysler/Dodge/Jeep, etc) for US/Canada & Mexico. All these functions are available(V2.62 and above) to download for all MK808BT on 1st, June, 2022. Autel is dedicated to make life easier!
Equipped VCI Mini, USB Wired+Wireless Diagnostic. Do you want to get out of your narrow driving seat for a car diagnosis? Compared with the old wired diagnostic tool MK808, MK808BT equipped with. Up to 33ft(10m) working range, enabling wireless diagnostic?
With more stable and faster data transmission. This way you can check any part of your car while holding the MK808BT or, as users commented, perform a diagnosis while sitting in a comfortable chair.
37+ Maintenance Services, Everything for you. How much did you spend on maintaining your car? So Autel MK808BT are actively reducing the unnecessary expense by integrating 37+ services, meeting most of maintenance needs, such as Oil/EPB/SAS/D P F/BMS/ABS Bleed/Injector, etc.
What would you do if the wipers stopped working? Don't be in a hurry to dismantle your cars! Bidirectional control tool MK808BT can perform real active test that can send commands to the vehicle's ECU to drive the actuators to work, like ABS, window, door, solenoids, valves, wipers, headlamp, etc, helping you quickly find out bad parts and pinpoint faulty issues. All Systems Diagnostic, Make Full Check for Cars.
Busy for a long time but can't find what's wrong with the car? Are you going to change your car? Autel MK808BT scanner can scan all available car systems and perform OE-level diagnosis by reading/clearing codes, viewing live data of multiple sensors in text, graph & analog, freeze frame data, ECU info & Bidirectional conrol/active test. Just a few simple clicks, you can easily master the car situation! Note: Not Support TPMS programming?
Auto Scan & Auto VIN, Easy to Use. If you are worry about complex operation, MaxiCOM MK808BT can avoid the trouble for you. More convenient is AutoScan that can automatically scan all vehicle's ECUs at one touch and find out fault codes. Note: AutoVIN does NOT work on all vehicles, depends on whether VIN is programmed to car ECU or not.Always support manually input VIN. 2022 Newest Version of MK808BT: Most Cost-effective OBD2 All Systems Diagnostic Scanner. Do you want to know what happened to your cars? Need to do some car maintenances but the cost is so expensive? Turn off annoying warning lights? OBD2 all-systems diagnostic scan tool MK808BT has all of those things. If you have several cars, you can almost imagine how much this little thing can save you, after all, the active test & maintenance cost of a car is very expensive. If you are DIYer enthusiasts, home mechanics or small or small-to-medium scaled workshop workers/ owners, the MK808BT is made for you. Stable and user-friendly design, 7-inch responsive touchscreen, 1GB RAM, enhanced built-in 64GB ROM, easy operation and 5000mAh battery, 7 hours continuously working time. No need to scratch your head, just few clicks to scan all available systems and, like doctor, diagnose where the problem is. OBD2 All Systems diagnostic scan tool MK808BT. Can access all available vehicle modules. Including but not limited to PCM, ECM, TCM, CTM, EPS, PDM, BCM, TPM, SCCM, RADIO and etc, covering more than 80 American, Asian and European vehicle makes. Supports complete OBD2 function, which is capable of performing all 10 modes of OBD2 tests. Autel MK808BT with Bluetooth VCI can perform. Reading and clearing codes on all vehicle systems and subsystems. Showing full live data stream of multiple sensors in graph & text, ECU information, perform active test(bi-directional control), etc. Retrieve detailed information of DTC records to locate problems. Erase DTC records and other data after reading codes and making appropriate repairs, used to turn off some annoying warnings light like check engine light(CEL) or reset ECU data after repair and replacement. View live data and parameters of multiple sensors in text, graph & analog, so you can monitor the working conditions of electronic components in real time to facilitate troubleshooting. Perform real active test that can send commands to the vehicle's ECU to drive the actuators to work, like ABS, window, door, solenoids, valves, wipers, headlamp, etc, helping you quickly find out bad parts and pinpoint faulty issues. View the specific information for the tested control unit, including unit type, version numbers and other specifications. AutoVIN feature does NOT work on all vehicles, depends on whether VIN is programmed to car ECU or not. You can always navigate your vehicle manually to perform diagnostics/services. MK808T dose Not support TPMS service. SOME OF 2022 NEWLY ADDED FEATURES. MK808BT BMW V4.00 version adds the following functions: 1.
Added support for models up to July 2021; 2. New chassis: F44, F93, F95, F96, G22, G23, G80, G82; 3. Added seven common special functions: transport mode, high-voltage battery, cruise calibration, air conditioning learning, rain light sensor, E G R self-learning, and FRM reset; 4. Arabic and Vietnamese also can be authorized if provided with device S/N(12 digits, at the back of the device, eg: VB7GL6C0142).2022 Newest Bi-Directional Control Scan Tool with New Features. 2022 Added Functional Benefits - Making MK808BT Ever Been So Powerful In It's value Range. Battery Test Capability (BT506 required).
Upgraded from MaxiCOM MK808, MaxiCheck MX808, Autel MaxiCOM MK808BT is exclusively equipped with battery test ability, namely, MK808BT can work with Autel BT506 battery tester to perform professional cranking/ charging system test and In-Vehicle & Out-of Vehicle Battery Test, and with over 95% accuracy result with advanced adaptive condutive technology, which is far more accurate than the 50% of market avreage accuracy. Warm Tips : Battery test service is at the first place of Top 10 of vehicle after-market. So, Battery test can help you win more buiness. Compatible with Autel MV108/MV105 Inspection Camera (not included). This is a very pratical and useful functions, which allows you to have a futher wear situation check on your car engine/transmission, etc internal structure, to avoid further damage or avoid potential dangerous driving.
This is a long-awaited feature for old customers!! Like other cloud space, it is a back garden for your diagnostic reports to help you enhance data centralization, share simply and quickly, reduce memory burden and improve work efficiency. Supports FCA "Auto Auth" gateway for 2018 and newer FCA cars(Chrysler/Dodge/Jeep, etc) for US/Canada & Mexico. NOTE: All these new functions are released on Autel system V2.62 and above, which are available to download for all MK808BT since 1st, June, 2022.Autel MaxiCOM MK808BT Key Features. If you are DIYer enthusiasts and home mechanics, the MK808BT is made for you. User-friendly design, 7-inch responsive touchscreen and easy operation. MK808BT can access all available vehicle modules including but not limited to PCM, TCM, CTM, EPS, PDM, and etc, covering more than 80 American, Asian and European vehicle makes. Autel MK808BT with Bluetooth VCI can perform wireless diagnosis, including reading and clearing codes on all vehicle systems and subsystems, showing full live data stream of multiple sensors in graph & text, E information, etc.
Read codes :retrieve detailed information of DTC records to locate problems. Clear codes : erase DTC records and other data after reading codes and making appropriate repairs, used to turn off some annoying warnings light like check engine light(CEL) or reset E data after repair and replacement. Live data : view live data and parameters of multiple sensors in text, graph & analog, so you can monitor the working conditions of electronic components in real time to facilitate troubleshooting. E Info : view the specific information for the tested control unit, including unit type, version numbers and other specifications.
Note : AutoVIN feature does NOT work on all vehicles, depends on whether VIN is programmed to car E or not. Versatile Maintenance and Reset Services. 37+ hot and special functions. Covering 99% of common maintenance needs, providing quick access to the vehicle systems for various scheduled reset and repair tasks, including but not limited to Oil reset, EPB reset, BMS register, DPF regeneration, SAS calibration, ABS brake bleed, injector co/ding, throttle reset, etc.
Oil Reset : Reset service mileage & service intervals after engine oil is changed. EPB Reset : To replace the worn brake pads/discs, you need to use MK808BT to enter Service mode, and then exit the mode after the replacement. BMS Management : Register the battery after replacement. DPF Regeneration : Perform DPF Regeneration to clear the blockage through continuous burning of the particulate matter captured in the DPF filter and turn off DPF warning light.SAS Calibration : When you disassemble the steering column or the steering angle sensor has a problem/replacement, it is necessary to do a reset/calibration to ensure the accurate steering of your vehicle. Injector co/ding : Write the new code to the E after replacement of injector.
Note : IMMO service only for a few Asian cars. If you need IMMO function, please check Autel IM508. Features That You May Be Interested. ABS Brake Bleed : You don't have to make a trip to the repair shop just for this. MK808BT comes with ABS Bleed function, which can guide you to manually bleed the air from the ABS module.
Note that You still need to bleed the air manually in the brake lines after ABS brake bleeding. IMMO Service : This service is. Designed for Asian vehicles that have low-grade anti-theft systems. If compatible with your vehicles, you can not only disable the lost vehicle keys but also program a replacement key fob. Not support the All Key Lost function!
If you need professional IMMO tools that can perform Key Programming and advanced IMMO functions, please consider Autel IM508. Note : It works on some vehicles. Auto Scan & Auto VIN :You don't need to worry about the operation, open and use it, as naturally as if you were using a smartphone. Two friendly shortcut keys AutoVIN and AutoScan make everything easier: AutoVIN can quickly identify your car's make, model, and year information; AutoScan can automatically scan all car's Es and find out fault codes.MK808BT BMW V4.00 version adds the following functions. Added support for models up to July 2021. New chassis: F44, F93, F95, F96, G22, G23, G80, G82. Added seven common special functions: transport mode, high-voltage battery, cruise calibration, air conditioning learning, rain light sensor, EGR self-learning, and FRM reset.
Arabic and Vietnamese also can be authorized if provided with device S/N(12 digits, at the back of the device, eg: VB7GL6C). 2022 New App : Cloud Report Management : This is a long-awaited feature for old customers!! Best solution for organizing messy files and reducing memory burden! Data Logging : If you are confused about diagnostic results, you can upload your diagnostic report to the Autel server on Data Logging, so that Autel engineers can directly receive and deal with your problem, and feedback the problem solution within 48 hours.Remote Desk : If you have any operational problems, you can use Remote Desk to allow Autel's support center, colleagues, or friends, to control your MK808BT tablet on their PC and perform remote diagnostic, with step-by-step operation to show you, easy to solve problems. Things Y ou M ight be C oncerned A bout. After registration, you can enjoy one-year free software and firmware updates. We guarantee that the MK808BT we sell are always the latest version of Autel's official update. But MK808BT never stops upgrading. With the continuous feedback from customers and the development of Autel technology, the MK808BT will not be just the MK808BT.
2022 New Version Updated to. Such as English (by default), German, Spanish, French, Traditional Chinese, Japanese, Polish, Portuguese, Russian, Italian, Korean, Dutch, Swedish, etc.Send S/N(12 digits, on the back of the device). To offer you a free authorization for language switch.
Autel OBD2 Scanner MK808BT has unmatched vehicle coverage, able to supports various protocols such as ISO9141-2, ISO14230-2, ISO15765, K/L-Line, Flashing Code, SAE-J1850 VPW, SAE-J1850PWM, ISO 11898 (Highspeed, Middlespeed, Lowspeed and Singlewire CAN, fault-tolerant CAN), SAE J2610, GM UART UART Echo Byte Protocol, Honda Diag-H Protocol, TP2.0, TP1.6.. Autel MK808BT diagnostic tool can work on 85+ American, European and Asian car makes and over 10000+ car models and can support some of the 2022 latest car models. Dodge DD-Ram 3500 Cab Chassis 2022, Dodge DF-Ram 3500 Cab Chassis 10K 2022, Dodge DJ-Ram 2500 2022, Dodge DP-Ram 4500 2022, Dodge DP-Ram 5500 2022, Dodge DS-Ram 1500 2022, Dodge DT-Ram 1500 and a lot more. Note: Autel MK808BT can not work on heavy trucks.
Operating System:AndroidTM 4.4.2, KitKat. Processor:Cortex-A9 processor (1.5 GHz).Display:7-inch LCD capacitive touchscreen with 1024 x 600 resolution. Connectivity: Mini USB 2.0 / Wi-Fi / HDMI Type A / Micro SD card (supports up to 32GB). Sensors:Light sensor for brightness auto changing, Ambient light sensor for brightness auto adjust. Audio input/output:Input: N/A Output: Buzzer Beep. Power and Battery:3.7 V/5000 mAh lithium-polymer battery Charges via 5 VDC power supply.
Tested Battery Life:Around 4.5 hours of continuous use. Battery Charging Input:5 V/1.5 A, Charges via 5 VDC power supply. Operating Temp:0 to 55°C(32 to 131°F).
Storage Temp:-20 to 60°C (-4 to 140°F). Operating Humidity:5% - 95% non-condensing.
Dimensions (W x H x D):237.8 mm (9.4") x 148.6 mm (5.9") x 35.5 mm (1.4). Net Weight:788 g 2.42 lb. Protocols :ISO9141-2, ISO14230-2, ISO15765, K/L-Line, Flashing Code, SAE-J1850 VPW, SAE-J1850PWM, ISO11898 (Highspeed, Middlespeed, Lowspeed and Singlewire CAN, fault-tolerant CAN), SAE J2610, GM UART, UART Echo Byte Protocol, Honda Diag-H Protocol, TP2.0, TP1.6.Autel MaxiCOM MK808BT Accessory Kit. USB Cable (for charging)1. USB Cable (for test)1. Please kindly be patiently wait for your order. This will help your product to be received safely and quickly! And we are not responsible for order's delay or miss because of your incomplete contact information. Please return the item within 30 days after receiving if you are not happy with your purchasing. We have been engaged for many years in the line of automobile diagnosing instruments and our corporation is established for the purpose of trustworthiness. We have office in Shenzhen, China and 2 warehouses that are located in HongKong and US.
This item is in the category "eBay Motors\Automotive Tools & Supplies\Diagnostic Service Tools\Code Readers & Scanners". The seller is "digitalmall-all" and is located in this country: US. This item can be shipped worldwide.